Here is a list of all variables with links to the structures/unions they belong to:
- d -
- DAI : LPC_I2S_Type
- DAO : LPC_I2S_Type
- DAT : LPC_I2C0_Type
- data : fru_internal_use_area, ipmi_msg
- DATA_BUFFER : LPC_I2C0_Type
- data_len : ipmi_msg
- DCRDR : CoreDebug_Type
- DCRSR : CoreDebug_Type
- deassertion_event_mask : SDR_type_01h_t, SDR_type_02h_t
- deferred_activation : t_ipmc_capabilities
- DEMCR : CoreDebug_Type
- dependent_clock_id : indirect_clock_descriptor
- description : t_component
- descriptor_cnt : amc_clock_config_record
- descriptors : amc_clock_config_record
- dest_addr : ipmi_msg
- dest_LUN : ipmi_msg
- DESTADDR0 : LPC_GPDMA_Type
- DESTADDR1 : LPC_GPDMA_Type
- DESTADDR2 : LPC_GPDMA_Type
- DESTADDR3 : LPC_GPDMA_Type
- DESTADDR4 : LPC_GPDMA_Type
- DESTADDR5 : LPC_GPDMA_Type
- DESTADDR6 : LPC_GPDMA_Type
- DESTADDR7 : LPC_GPDMA_Type
- device_cap : SDR_type_12h_t
- DEVID : TPI_Type
- DEVINTCLR : LPC_USB_Type
- DEVINTEN : LPC_USB_Type
- DEVINTPRI : LPC_USB_Type
- DEVINTSET : LPC_USB_Type
- DEVINTST : LPC_USB_Type
- DEVTYPE : TPI_Type
- DFR : SCB_Type
- DFSR : SCB_Type
- DHCSR : CoreDebug_Type
- diag_devID : sensor_t
- diff_mode : max116xx_cfg
- DIR0 : LPC_GPIO_Type
- DIR1 : LPC_GPIO_Type
- DIR2 : LPC_GPIO_Type
- DIR3 : LPC_GPIO_Type
- DIR4 : LPC_GPIO_Type
- direct_clock_descriptor_cnt : clock_config_descriptor
- direct_descriptor : clock_config_descriptor
- DLL : LPC_UART0_Type, LPC_UART1_Type, LPC_UART2_Type, LPC_UART3_Type
- DLM : LPC_UART0_Type, LPC_UART1_Type, LPC_UART2_Type, LPC_UART3_Type
- DMA1 : LPC_I2S_Type
- DMA2 : LPC_I2S_Type
- DMACR : LPC_SSP0_Type, LPC_SSP1_Type
- DMACREQSEL : LPC_SYSCON_Type
- DMAINTEN : LPC_USB_Type
- DMAINTST : LPC_USB_Type
- DMARCLR : LPC_USB_Type
- DMARSET : LPC_USB_Type
- DMARST : LPC_USB_Type
- DOM : LPC_RTC_Type
- DOW : LPC_RTC_Type
- DOY : LPC_RTC_Type
- DR : LPC_ADC_Type, LPC_SPI_Type, LPC_SSP0_Type, LPC_SSP1_Type
- DT : LPC_MCPWM_Type
1.11.0