Here is a list of all variables with links to the structures/unions they belong to:

- r -

RASR : ARM_MPU_Region_t
RAWINTERRSTAT : LPC_GPDMA_Type
RAWINTTCSTAT : LPC_GPDMA_Type
RBAR : ARM_MPU_Region_t
RBR : LPC_UART0_Type, LPC_UART1_Type, LPC_UART2_Type, LPC_UART3_Type
RDA : LPC_CAN1_Type, LPC_CAN2_Type
RDB : LPC_CAN1_Type, LPC_CAN2_Type
read_f : fru_cfg
readable_threshold_mask : SDR_type_01h_t, SDR_type_02h_t
readout_value : sensor_t
rec_fmt_ver : amc_clock_config_record, amc_point_to_point_record, fru_module_current_record_t, zone3_compatibility_rec
recID_LSB : SDR_entry_hdr_t
recID_MSB : SDR_entry_hdr_t
reclength : SDR_entry_hdr_t
record_chksum : fru_multirecord_area_header
record_len : fru_multirecord_area_header
record_sharing : SDR_type_02h_t
record_type : amc_point_to_point_record
record_type_id : fru_multirecord_area_header
rectype : SDR_entry_hdr_t
REEP : LPC_USB_Type
ref_sel : max116xx_cfg
registers : ina220_config_t
regs : ina220_data_t, ina3221_data_t
req_handler : t_req_handler_record
RESERVED : fw_info, LPC_ADC_Type, LPC_EMAC_Type, LPC_GPDMA_Type, LPC_GPIO_Type, LPC_GPIOINT_Type, LPC_PINCONNECT_Type, LPC_PWM1_Type, LPC_QEI_Type, LPC_RTC_Type, LPC_SPI_Type, LPC_SYSCON_Type, LPC_TIMER0_Type, LPC_TIMER1_Type, LPC_TIMER2_Type, LPC_TIMER3_Type, LPC_UART0_Type, LPC_UART1_Type, LPC_UART2_Type, LPC_UART3_Type, LPC_USB_Type
reserved : amc_point_to_point_record, clock_config_descriptor, dc_load_rec, dc_output_rec, direct_clock_descriptor, fmc_subtype_rec, fru_multirecord_area_header, ina220_config_reg_t, indirect_clock_descriptor, SDR_type_12h_t
RESERVED0 : DWT_Type, ITM_Type, NVIC_Type, SCB_Type, SCnSCB_Type, TPI_Type
RESERVED1 : DWT_Type, ITM_Type, LPC_EMAC_Type, LPC_GPDMA_Type, LPC_GPIO_Type, LPC_PINCONNECT_Type, LPC_PWM1_Type, LPC_SYSCON_Type, LPC_TIMER0_Type, LPC_TIMER1_Type, LPC_TIMER2_Type, LPC_TIMER3_Type, LPC_UART0_Type, LPC_UART1_Type, LPC_UART2_Type, LPC_UART3_Type, LPC_USB_Type, NVIC_Type, SCnSCB_Type, TPI_Type
reserved1 : SDR_type_01h_t, SDR_type_02h_t
RESERVED2 : DWT_Type, ITM_Type, LPC_EMAC_Type, LPC_GPDMA_Type, LPC_GPIO_Type, LPC_PINCONNECT_Type, LPC_SYSCON_Type, LPC_UART0_Type, LPC_UART1_Type, LPC_UART2_Type, LPC_UART3_Type, LPC_USB_Type, NVIC_Type, TPI_Type
reserved2 : SDR_type_01h_t, SDR_type_02h_t
RESERVED3 : ITM_Type, LPC_EMAC_Type, LPC_GPDMA_Type, LPC_GPIO_Type, LPC_PINCONNECT_Type, LPC_SYSCON_Type, LPC_UART0_Type, LPC_UART2_Type, LPC_UART3_Type, LPC_USB_Type, NVIC_Type, TPI_Type
reserved3 : SDR_type_02h_t
RESERVED4 : ITM_Type, LPC_EMAC_Type, LPC_GPDMA_Type, LPC_GPIO_Type, LPC_PINCONNECT_Type, LPC_SYSCON_Type, LPC_UART0_Type, LPC_UART2_Type, LPC_UART3_Type, LPC_USB_Type, NVIC_Type, TPI_Type
RESERVED5 : ITM_Type, LPC_EMAC_Type, LPC_GPDMA_Type, LPC_SYSCON_Type, LPC_USB_Type, NVIC_Type, TPI_Type
RESERVED6 : LPC_EMAC_Type, LPC_GPDMA_Type, LPC_SYSCON_Type, LPC_USB_Type
RESERVED7 : LPC_EMAC_Type, LPC_GPDMA_Type, LPC_SYSCON_Type, LPC_USB_Type, TPI_Type
RESERVED8 : LPC_SYSCON_Type
RESERVED9 : LPC_SYSCON_Type
reset : ina220_config_reg_t, ina3221_config_reg_t
resource_id : amc_clock_config_record
retries : ipmi_msg_cfg
Rexp_Bexp : SDR_type_01h_t
RFS : LPC_CAN1_Type, LPC_CAN2_Type
RID : LPC_CAN1_Type, LPC_CAN2_Type
ripple_noise_pkpk : dc_load_rec, dc_output_rec
RIS : LPC_SSP0_Type, LPC_SSP1_Type
RS485ADRMATCH : LPC_UART0_Type, LPC_UART1_Type, LPC_UART2_Type, LPC_UART3_Type
RS485CTRL : LPC_UART0_Type, LPC_UART1_Type, LPC_UART2_Type, LPC_UART3_Type
RS485DLY : LPC_UART0_Type, LPC_UART1_Type, LPC_UART2_Type, LPC_UART3_Type
rshunt : ina220_data_t, ina3221_data_t
RSID : LPC_SYSCON_Type
RSV : LPC_EMAC_Type
RTC_AUX : LPC_RTC_Type
RTC_AUXEN : LPC_RTC_Type
runtime : fru_data
RXBITRATE : LPC_I2S_Type
RXCONSUMEINDEX : LPC_EMAC_Type
RXDATA : LPC_USB_Type
RXDESCRIPTOR : LPC_EMAC_Type
RXDESCRIPTORNUMBER : LPC_EMAC_Type
RXFIFO : LPC_I2S_Type
RXFILTERCTRL : LPC_EMAC_Type
RXFILTERWOLCLEAR : LPC_EMAC_Type
RXFILTERWOLSTATUS : LPC_EMAC_Type
RXMODE : LPC_I2S_Type
RXPLEN : LPC_USB_Type
RXPRODUCEINDEX : LPC_EMAC_Type
RXRATE : LPC_I2S_Type
RXSR : LPC_CCAN_Type
RXSTATUS : LPC_EMAC_Type