Here is a list of all variables with links to the structures/unions they belong to:
- s -
- s0_cfg : cdce906_cfg
- s1_cfg : cdce906_cfg
- SA0 : LPC_EMAC_Type
- SA1 : LPC_EMAC_Type
- SA2 : LPC_EMAC_Type
- scan_mode : max116xx_cfg
- SCLH : LPC_I2C0_Type
- SCLL : LPC_I2C0_Type
- SCR : LPC_UART0_Type, LPC_UART1_Type, LPC_UART2_Type, LPC_UART3_Type, SCB_Type
- SCS : LPC_SYSCON_Type
- sdr : sensor_t
- sdr_length : sensor_t
- sdr_type : sensor_t
- SDRversion : SDR_entry_hdr_t
- SEC : LPC_RTC_Type
- self_test : t_ipmc_capabilities
- semaphore : i2c_mux_state
- sensor : ina220_data_t
- sensor_max_reading : SDR_type_01h_t
- sensor_min_reading : SDR_type_01h_t
- sensor_units_1 : SDR_type_01h_t, SDR_type_02h_t
- sensor_units_2 : SDR_type_01h_t, SDR_type_02h_t
- sensor_units_3 : SDR_type_01h_t, SDR_type_02h_t
- sensorcap : SDR_type_01h_t, SDR_type_02h_t
- sensorinit : SDR_type_01h_t, SDR_type_02h_t
- sensornum : SDR_type_01h_t, SDR_type_02h_t
- sensors : ina3221_data_t
- sensortype : SDR_type_01h_t, SDR_type_02h_t
- seq : ipmi_msg
- services_affected : t_ipmc_capabilities
- SET : LPC_QEI_Type
- SET0 : LPC_GPIO_Type
- SET1 : LPC_GPIO_Type
- SET2 : LPC_GPIO_Type
- SET3 : LPC_GPIO_Type
- SET4 : LPC_GPIO_Type
- settable_threshold_mask : SDR_type_01h_t, SDR_type_02h_t
- settings : sensor_t
- SFF_GRP_SA : LPC_CANAF_Type
- SFF_SA : LPC_CANAF_Type
- SHCSR : SCB_Type
- SHP : SCB_Type
- shunt_adc_resolution : ina220_config_reg_t
- shunt_div : ina220_config_t
- shunt_resistor : ina3221_config_t
- shunt_voltage_conversion_time : ina3221_config_reg_t
- signed_flag : sensor_t
- slaveaddr : SDR_type_12h_t
- SLEEPCNT : DWT_Type
- SOFTBREQ : LPC_GPDMA_Type
- SOFTLBREQ : LPC_GPDMA_Type
- SOFTLSREQ : LPC_GPDMA_Type
- SOFTSREQ : LPC_GPDMA_Type
- SPPR : TPI_Type
- SPSEL : CONTROL_Type
- SR : LPC_CAN1_Type, LPC_CAN2_Type, LPC_SPI_Type, LPC_SSP0_Type, LPC_SSP1_Type
- src_addr : ipmi_msg
- src_LUN : ipmi_msg
- SRCADDR0 : LPC_GPDMA_Type
- SRCADDR1 : LPC_GPDMA_Type
- SRCADDR2 : LPC_GPDMA_Type
- SRCADDR3 : LPC_GPDMA_Type
- SRCADDR4 : LPC_GPDMA_Type
- SRCADDR5 : LPC_GPDMA_Type
- SRCADDR6 : LPC_GPDMA_Type
- SRCADDR7 : LPC_GPDMA_Type
- ssc_mod_amount : cdce906_cfg
- ssc_mod_freq : cdce906_cfg
- ssel_pin : ssp_config
- SSPSR : TPI_Type
- standby : dc_output_rec
- STAT : LPC_ADC_Type, LPC_I2C0_Type, LPC_QEI_Type
- STATE : LPC_I2S_Type
- state : i2c_mux_state, LEDConfig, sensor_t
- STATF0 : LPC_GPIOINT_Type
- STATF2 : LPC_GPIOINT_Type
- STATR0 : LPC_GPIOINT_Type
- STATR2 : LPC_GPIOINT_Type
- STATUS : LPC_EMAC_Type, LPC_GPIOINT_Type
- STCTRL : LPC_USB_Type
- STIR : NVIC_Type
- subtype : fmc_subtype_rec
- SUPP : LPC_EMAC_Type
- SYNC : LPC_GPDMA_Type
- sysclk : lpc_uart_cfg
- SYSERRINTCLR : LPC_USB_Type
- SYSERRINTSET : LPC_USB_Type
- SYSERRINTST : LPC_USB_Type
1.11.0